Gallery of Studio Formica / Studio Arquitetônico

Related Products

OKITO PLY – the elegance of the essential. The ergonomics of the OKITO solid wood chair were transferred to the OKITO PLY shaped wood version. In addition to the optics convinced OKITO PLY by its light weight of three kilograms. It allows it to be perfectly stacked, transported and shipped. It thus offers all the advantages of an object chair and is less expensive than the solid wood version OKITO. The double bar, which supports the backrest and represents the most striking detail of the minimalist design, absorbs the movement of the body and resonates with it. Together with the ergonomic shaped wood elements, this creates a high level of seating comfort with plenty of room for movement. The upholstery variant offers additional seating comfort. Whether individually or in series, it offers versatile possibilities for object seating of restaurants, libraries and lecture halls. The veneered plywood chair OKITO PLY is available in oak, black stained oak and American walnut veneer. The further version of the surface in beech matt black is especially hard-wearing. A stacking trolley OKITO TROLLEY is also available for projects. MATERIAL Seat and backrest: Veneered plywood – Oak, oak colour stain, American walnut Frame: Metal matt black powder coated (RAL 9005) Row connector: Wire bow hanger, chrome – extendable, distance of the axes 53 cm SURFACE matt lacquered VERSION Stackable, incl. stack buffer DIMENSIONS Upholstered seat h 79 cm, w 47 cm, d 48 cm Seating h 47 cm EXTRAS CATAS Test EN 1728:2012 Level 2 – extreme

Save

Check on Architonic

Fully upholstered stacking chair with brass frame with felt feet. H: 82 cm, seat height: 46 cm, Ø46 cm.

Save

Check on Architonic

MATERIAL Solid wood – Oak, oak colour stain, American walnut VERSION Wooden seat or close upholstery Mounted with plastic glides, additional furniture glides for any type of flooring on request – Wagner QuickClick® In further timbers available SURFACE Impregnated with natural hardwax-oil Oak colour stain: matt lacquered DIMENSIONS Close upholstery d44 w40 h79 Seating h48 EXTRAS CATAS Test EN 1728:2012 Level 2 – extreme

Chair available for indoor and outdoor. Indoor version: in solid ash wood Ø30 mm with acrylic painting finish natural colour and with acrylic water-based finish, or charcoal-dyed, with acrylic base and acrylic painting finish or in tubular steel Ø22 mm lacquered with epoxy powder coating gunmetal gray colour. Seat chassis in multilayer sprung with coated rubber elastic straps, padded in polyurethane foam covered with acrylic fibre layers. Outdoor version: with tubular frame Ø22 mm in Stainless Steel AISI 316 lacquered with epoxy powder coating gunmetal grey colour; seat chassis in plywood for outdoor use, sprung with coated rubber elastic straps, padded in open cell structure polyurethane foam DRYFEEL S covered with fibres for outdoor and with a waterproof fabric cover. Decorative weave for backrest and armrests with profile in hide, cellulose cord (both indoor use only) or waxed rope (indoor/outdoor use), in the colours of collection. Non-removable seat upholstery in fabric or leather; for the outdoor version, in outdoor fabrics only. Floor support secured by black PVC feet.

Save

Check on Architonic

Armchair available for indoor and outdoor. Indoor version: tubular steel frame, with black epoxy powder coating for the model without housse and long skirt, while with gunmetal grey colour for the version with short skirt. Seat chassis in poplar plywood with cross-woven coated rubber elastic straps. Seat and backrest padded with insert in polyurethane foam. Covering in 100% polyether thermally bonded onto a polyamide velveteen backing. Upholstery in fabric only (except velvet), zipped to the polyether covering for the version with housse only and fully removable by zippers and Velcro fastenings. For the version without housse, upholstery in leather or fabric, fully removable by zippers after unscrewing the seat chassis from the frame for the fabric version only. Outdoor version: frame in tubular AISI 316 Stainless Steel with matt satin-fnish or with epoxy polyester powder coating gunmetal grey colour, burnished colour or black colour. Seat panel in plywood for outdoor with cross-woven coated rubber elastic straps. Seat and backrest padded with polyurethane foam DRYFEEL S. Available only in the version without housse. Upholstery with outdoor fabrics, fully removable by zippers after unscrewing the seat panel from the frame . Seat depth 45cm.

Save

Check on Architonic

Upholstered seat, moulded plywood back, upholstered on the front, rear legs and seat frame solid bentwood W61, D60, H76, SH43.5

Save

Check on Architonic

Technical characteristics Structure finishing: - metal painted black M440Seat/backrest finishing: - upholstery in fabric/synthetic leather/leathernot removable

Save

Check on Architonic

Spread across four seats, the series comprises of a dining chair and a lounge chair, which also comes with a high backrest, with or without a table. The idea of using lightweight metal frames to hold the seat and backrest gives you a sense of seclusion yet provides an open interior.

Save

Check on Architonic

Padded chair with legs in dyed ash wood, seat and back in Cat. A Nubuck leather. Dimensions in cm: 56 x 60 x 80 CUSTOMIZATION: Legs available in natural or dyed wood, and in aniline-dyed or lacquered wood in all RAL/NCS colours. Available in Cat. A, B, C leather and in matt or shiny velvet. Available in the high stool and in the small armchair version.

Save

Check on Architonic

NATEVO - brand FLOU Thanks to its sinuous shape, the chair Briscola beautifully complements any type of table. Comfort is guaranteed by the base and the backrest, consisting of a single foamed shell that matches any style. The pleasantly rounded lines contrast with the sharp cut of the upholstery, creating a stylish chair that was unmistakably inspired by the world of automobiles. Tailored details soften the sharpness of the metal structure. › The cover of the backrest and seat in fabric or leather is completely removable. The metal structure is available with a matt burnished, anodic bronze and matt greige finish.

Save

Check on Architonic

The chair Miss Malice, designed by Studio Arketipo, has a vintage look, especially when covered in leather and it is characterized by thin metal legs. The roundness of the padded seat and back gives a soft and cosy line to the chair.

Save

Check on Architonic

The three-dimensional lightness of the legs, made of metal wires, is in contrast with the seat and back and create a balance between forms and volumes. The slightly curved back enwraps the seat padding and grants a great comfort.

Save

Check on Architonic